Foreign debris can damage your windshield. The impact of a rock or any object that hits your windshield can leave behind cracks or chips or can shatter the windshield. A damaged windshield needs to be repaired professionally.
Windshields are specially designed to offer structured support for the car and stand up to the stress of traveling on the highways. However, damage can occur. Below are your options in terms of windshield auto glass repair in Tucson, AZ.
Typically, this option is sold on DIY repair kits. Such kind of repair method is rarely used by experts because it’s not the most effective repair method. If your windshield has a chip or small crack, you can apply the patch or film over the damaged site after you cut it down to size. Then, smooth the patch out and let it cure. This process causes the patch to harden, strengthening the damaged area. But, it’s important to note that a patch only helps to hold the area together to prevent further cracking, hence, you still need to get your car fixed by a professional.
This windshield glass repair method is commonly used by professionals who repair chips or cracks on windshields. The method involves injecting the resin into the crack or chip and using a heat source to heat up the area, so the resin hardens. When it hardens, the resin slightly expands, filling the chips or cracks. This method helps in preventing the crack or chip from spreading and strengthening the damaged area.
This windshield glass repair method is necessary for cracks or chips that cannot be repaired. A chip that is bigger than a quarter may not be filled. Cracks that are bigger than the size of a dollar bill must not be repaired. Cracks and chips that have been repaired before and continue to grow should not be repaired again. Rather, they require windshield replacement. This method includes removing the old windshield and inserting a new piece of glass into the area. This job should be left to the professionals and should not be done on your own.
An experienced auto glass specialist will inspect the damage of your windshield and let you know if it can be fixed or requires total replacement. If repair is still possible, they will clean the dust and debris from the windshield and perform some drilling to prepare the area. After creating a smooth surface, they will inject a clear resin material into the opening, let it cure, and polish it up like new.